Joerns Oxford Advance Manual De Instrucciones página 6

Oxford
®
Advance
3. Lay the Advance flat on the floor (ensure rear castors are securely locked).
4. Lift the mast assembly upright (using the top of the push handle), and drop the mast into the slot,
aligning the mast engagement decals (1), tighten mast lock knobs (2), release braked castors (3).
SAFETY NOTE: Avoid trapping fingers. Keep fingers away from the end of the mast when inserting
into the mast slot. Ensure the mast is fully engaged before tightening the mast locking device.
5. Open legs fully. ENSURE leg-locking knob inserts flush against the base casting and the legs
will no longer move freely. The legs will then only operate by the use of the foot pedal mecha-
nism located at the rear of the base.
6
English