General Safety Information - Campbell Hausfeld CL154500 Manual De Instrucciones De Operación

Operating Instructions
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
General Safety
Information
CALIFORNIA PROPOSITION 65
This product or
its power cord
may contain chemicals, including lead,
known to the State of California to
cause cancer and birth defects or other
reproductive harm. Wash hands after
handling.
You can
create
dust when you cut, sand, drill
or grind materials such as
wood, paint, metal, concrete, cement, or
other masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.
GENERAL SAFETY
This product is a part of a high pressure
system and the following safety
precautions must be followed at all times
along with any other existing safety rules.
1. Read ALL manuals included
with this product carefully.
Be thoroughly familiar with
the controls and the proper
use of the equipment.
2. ONLY persons well acquainted with
these rules of safe operation should
be allowed to use the air tool.
Do NOT
exceed
maximum operating pressure
of the air tool (90 psi). The air
tool COULD explode and result
in death or serious personal injury.
3. Do NOT exceed any pressure rating
of any component in the system.
2
Maximum operating pressure of
90 PSI is measured at the tool inlet
while the tool is running. The pressure
drop between the compressor and
tool needs to be compensated for at
the compressor.
pressure from the system
before attempting to install,
service, relocate or perform
any maintenance.
4. Disconnect air tool from air supply
when not in use and before changing
tools, attachments or performing
service.
and ear protection MUST be
worn during operation.
5. Do NOT wear loose fitting clothing,
scarves, neck ties or jewelry when
operating any tool. Loose clothing
or jewelry may become caught in
moving parts and result in serious
personal injury.
6. Do NOT depress trigger when
MANUAL
connecting air supply hose to tool.
7. Do NOT put hands near or under
moving parts.
working in awkward positions and
repetitive work motions can cause injury
to hands and arms. Stop using any tool
if discomfort, numbness, tingling or pain
occur and consult a physician.
8. Check air hoses for weak or worn
condition before each use. Make sure
ALL connections are secure.
www.campbellhausfeld.com
Release
ALL
Safety
glasses
Excessive exposure
to vibration,