HoMedics TRIPLE COMFORT PRO Manual De Instrucciones Y Garantía página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

POWER BUTTON
To turn on the Massage functions, first press the POWER
button. The L.E.D indicator will illuminate and confirm
your selection. To turn off the massage functions,
simply press the button again. The L.E.D indicator will
blink while the massage mechanism returns to its
lowest point and then turn off.
UPPER BACK
Upper back can only be activated when either Kneading
or Rolling is activated. Press "Upper Back" button once,
the button will illuminate, and Kneading or Rolling the
Upper to Mid-back will begin.
FULL BACK
Full back can only be activated when either Kneading
or Rolling is activated. Press "Full Back" button once,
the button will illuminate, and Kneading or Rolling the
entire back will begin.
KNEAD
Kneading is a deep penetrating massage. "Knead" can
only be activated when Power is on.
SPOT MASSAGE
While the unit is in Kneading massage, press either
button to stop and focus the kneading action in one
place. Once the unit is operating in Spot Massage, you
may adjust the mechanism position by holding down
either button until the desired position is reached. The
up arrow will move the mechanism upwards and the
down arrow will move it down. Once you release the
button, the mechanism will stop in that place.
WIDTH ADJUSTMENT FEATURE
Width can only be activated when Rolling is on. Press
the button to adjust the massage nodes width. With
each press, the massage heads will move to the next
available position.
8
DEMO BUTTON
For a brief demonstration of the features of this massage
cushion, press the Demo button. The L.E.D. light will blink to
indicate active mode and the unit will briefly go through each
function. Once completed, the unit automatically turns off.
PERFECT FIT
To customize the massage to your height, press the PERFECT
FIT button at the highest desired position while the massage
function is on. The massage heads will not travel higher than the
selected position for the duration of the massage. To deselect,
press the PERFECT FIT button a second time.
LOWER BACK
Lower back can only be activated when either Kneading or
Rolling is activated. Press the "Lower Back" button once, the
button will illuminate, and Kneading or Rolling the Lower to
Mid-back will begin.
ROLL
Rolling is like two hands working slowly up and down your back.
"Roll" can only be activated when Power is on. Press "Roll"
once and LED light will illuminate; Kneading will be off. Press it
again, Rolling will turn off.
VIBRATION MASSAGE
Add invigorating vibration massage. To turn on vibration press
Vibration once, this will initiate vibration action on Low intensity.
To increase intensity, press a second time for Medium intensity
and a third time for High intensity. To turn off press Vibration a
fourth time.
HEAT BUTTONS
This Massager has soothing heat in the back and the seat
cushion. To enjoy soothing heat, simply press the heat button(s)
and the corresponding red L.E.D. will illuminate. To deselect,
press the button(s) again and the the corresponding L.E.D will
turn off. Soothing heat in the back can only be activated when
the Kneading or Rolling Massage is on.
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mcs-550h

Tabla de contenido