Available Operations During A Call; Useful Functions; Songpal With Android Smartphone - Sony XAV-V751BT Manual De Instrucciones


(voice command)*
Say a voice tag stored on the cellular phone.

(phone number input)
Enter the phone number.
 Preset numbers (1 to 6)
Select the stored contact.
To store the contact, see "Presetting phone
numbers" (page 14).
*1 The cellular phone needs to support PBAP (Phone
Book Access Profile).
*2 Do not use the voice command function on the
cellular phone while it is connected to this unit.
*3 Voice command may not work depending on the
recognition specification of the cellular phone. For
details, visit the support site (page 31).
3
Touch .
The phone call starts.
Presetting phone numbers
You can store up to 6 contacts in the preset list.
1
In the phone screen, select a phone number
that you want to store in the preset dial
from the phonebook.
The confirmation display appears.
2
Touch [Preset], then the desired preset
number (1 to 6).
The contact is stored to the selected preset
number.
Available Operations During a
Call
To adjust the ringtone volume
Press VOLUME+/– while receiving a call.
To adjust the talker's voice volume
Press VOLUME+/– during a call.
To adjust the volume for the other party (Mic
gain adjustment)
During a handsfree call, touch
Gain] to [Low], [Middle] or [High].
To switch between handsfree mode and
handheld mode
During a call, touch
phone call audio between the unit and cellular
phone.
Note
Depending on the cellular phone, this operation may not be
available.
To answer an incoming call automatically
Touch , then set [Auto Answer] to [ON].
14
GB
2 * 3
, then set [MIC
to switch the

Useful Functions

SongPal with Android
Smartphone
Downloading the latest
"SongPal" application is required
from Google Play.
Notes
• For your safety, follow your local
traffic laws and regulations, and do
not operate the application while
driving.
• Connecting an Android smartphone
while "SongPal" is installed to this
unit allows you to receive
notifications of your SMS or
calendar, etc. through the car speakers and control the
unit by voice command.
• What you can control with "SongPal" varies depending on
the connected device.
• To make use of "SongPal" features, see the details on your
Android smartphone.
• Display images of the "SongPal" application used in this
Operating Instruction may differ with the actual ones.
• Messages of the "SongPal" application that appear on this
unit and your Android smartphone may differ.
• For further details on "SongPal," visit the following URL:
http://rd1.sony.net/help/speaker/songpal/
Establishing the SongPal connection
1
Make the BLUETOOTH connection with
Android smartphone (page 9).
2
Launch the "SongPal" application.
3
Press HOME, then touch [Settings].
4
Touch , then set [SongPal] to [Connect].
Connection to Android smartphone starts.
For details on the operations on an Android
smartphone, see the help section of the
application.
If the device number appears
Make sure that the number is displayed (e.g.,
123456), then select "Yes" on the Android
smartphone.
To terminate connection
Set [SongPal] to [Disconnect] in [General Settings].