Available Operations During A Call; Phonebook Management - Sony XAV-602BT Manual De Instrucciones


(call history)*
Select a contact from the call history list.
The unit stores the last 20 calls.

(redial)
Make a call automatically to the last
contact you made.

(phonebook)*
Select a contact from the name list/
number list in the phonebook. To search
the desired contact by alphabetical order
in the name list, touch
For details on how to manage the
phonebook data, see "Phonebook
Management" (page 18).

(voice dial)*
Say a voice tag stored on the cellular
phone.

(phone number input)
Enter the phone number.

Preset number
Touch a preset number ([1] to [6]).
The unit stores up to 6 contacts in the
list.
For details on how to store, see
"Presetting phone numbers" (page 19).
*1 The cellular phone needs to support PBAP
(Phone Book Access Profile).
*2 Do not use the voice dial function on the cellular
phone while it is connected to this unit.
*3 Voice dial may not work depending on the
recognition specification of the cellular phone.
For details, visit the support site on the back
cover.
3
Touch .
The call is made and the calling display appears
until the other party answers.
Available Operations During a
Call
To adjust the talker's voice volume
The level of the talker's voice volume will be stored
into memory, independently from the regular
volume level.
Rotate the volume control dial during a call.
To send DTMF (Dual Tone Multiple
Frequency) tones
Touch , then the required number keys.
18
GB
1
1
.
2 * 3
To transfer the current call to the cellular
phone
Touch .
To transfer back to handsfree calling, touch
again.
Available options
During a handsfree call, press
[Speech Quality] Reduces echo and noise during
a call. For normal use, set to
[Mode 1]. If the outgoing sound
quality is unsatisfactory, set to
[Mode 2].
[MIC Gain] Adjusts the microphone volume
for the other party: [Low],
[Middle], [High].

Phonebook Management

Note
Prior to disposal or changing ownership of your car with
this unit still installed, be sure to erase all the
phonebook data in this unit to prevent possible
unauthorized access, by doing any of the following:
 Delete the phonebook data by initializing (page 23).
 Press the reset button.
 Disconnect the power supply lead.
Selecting phonebook data
You can access the phonebook data of a cellular
phone or this unit's internal data to make a call.
1
Press HOME, then touch [Phone].
The BLUETOOTH phone display appears.
2
Touch , then [Phonebook Select].
3
Touch the desired item.
To store phonebook data (When
[Internal] has been selected from
[Phonebook Select])
You can send phonebook data from the connected
cellular phone to this unit.
Press HOME, then touch [Phone] 
Phonebook]. The unit is ready to receive the
phonebook data.
Send the phonebook data by operating the
connected cellular phone.
If data is stored successfully, the BLUETOOTH device
name appears on the display of the unit.
.
 [Receive