Marta MT-1173 Manual De Instrucciones página 8

Tabla de contenido

Publicidad

 Close the cap and place the tank back
 If necessary, use additional brush accessory
 Make sure switcher is in Off position.
 Connect the appliance to the mains. Switch proper mode.
 Wait for 35 – 45 sec
 Hang clothes on hangers or use trousers clip
 Take steamer and start operating
 Put thermal insulated glove on if necessary
 Use steamer frame for cuffs, collar and pockets
OPERATING MODES
1
– temperature 98С°, steam flow 10 g/min
2
– temperature 98С°, steam flow 14 g/min
3
– temperature 98С°, steam flow 17 g/min
4
– temperature 98С°, steam flow 21 g/min
5
– temperature 98С°, steam flow 24 g/min
6
– temperature 98С°, steam flow 28 g/min
7
– temperature 98С°, steam flow 34 g/min
8
– temperature 98С°, steam flow 35 g/min
9
– temperature 98С°, steam flow 38 g/min
10
– temperature 98С°, steam flow 40 g/min
FINISH
 Turn the modes switcher in off position, unplug from the mains
 Wait for 30 minutes to allow the appliance cooling down
 Pour the remaining water out of the container, remove the water drain valve. Make sure the appliance is empty.
CLEANING AND MAINTENANCE
 Before cleaning, always unplug the appliance
Clean the device with a damp cloth, wipe dry
Clean the appliance from scale regularly. Use special cleaners that can be purchased at special stores. Applying cleaners, follow the instructions on the packaging
TROUBLESHOOTING
Case
No steam
Cause
Device is not switched on
Watertank is empty
Steam hose is folded or deformed
Solution
Check connection with outlet
Switch off the device, cool , pour water
in watertank
Exclude the fold or deformation of steam
hose
8

Publicidad

Tabla de contenido
loading

Tabla de contenido