Bradley S19-690HR Manual De Instalación página 4

S19-690HR
1b Eyewash installation — S19-690HR
Remove the plastic dust plug from the
bottom of the yoke assembly and discard.
4 9/10/2018
Attach the eyewash yoke assembly to
the tank . Max . torque 150 In Lbs . (The
excess heater cable from the yoke
assembly will be tucked into the heater
jacket in a later step .) Route the power
A
cable through the tank handle .
NOTICE: Check to ensure the heat
trace cable from the yoke assembly
is not kinked or damaged from
assembly.
Bradley • 215-1749 Rev. C; ECN 18-05-033
Installation