GreenWorks LB40A010 El Manual Del Propietario página 7

OPERATION
CHECKING BATTERY CAPACITY
Note: The battery is not shipped fully charged. It is recommended to fully charge before
first use to ensure that maximum run time can be achieved. This lithium-ion battery will not
develop a memory and may be charged at any time. A fully discharged battery pack will require
approximately 150 minutes to fully charge from a discharged state.
Press the battery capacity indicator (BCI) button. The lights will illuminate according to the
batteries capacity level. See chart below:
BATTERY CAPACITY
INDICATOR (BCI) BUTTON
BATTERY PROTECTION FEATURES
GW 40V lithium-ion battery packs are designed with features that protect the lithium-ion cells and
maximize battery life.
If the tool stops during use, release the trigger to reset and resume operation. If the tool still does
not work, the battery needs to be recharged.
COLD WEATHER OPERATION
The lithium-ion battery pack can be used in temperatures down to -20°C(-4°f). Put the battery
pack on a tool and use the tool in a light duty application. After about a minute, the pack will
warm up and begin operating normally.
Lights
4 Green Lights
3 Green Lights
2 Green Lights
1 Green Light
Lights go out
Capacity
The battery is at full capacity
The battery is at 75% capacity
The battery is at 50% capacity
The battery is at 25% capacity and requ-
ires charging soon
The battery is less than 10% capacity
and requires charging immediately
7
LIGHT METER
BATTERY METER