Cisco Systems Linksys AG241 Guía De Instalación Rápida página 8

4 IPoA
If your ISP says that you are
connecting through IPoA, perform
these steps:
a
Select IPoA for the Encapsulation.
b
Enter the IP Address and the
Subnet Mask.
c
Enter the Default Gateway
address.
d
Enter the DNS in the Primary
and/or Secondary fields. You
need to enter at least one DNS
address.
e
Click the Save Settings button to
save the settings.
D
If you haven't already done so,
click the Save Settings button to
save your Setup settings. Close
the web browser.
E
Congratulations! You've
successfully configured the
Gateway. Test the setup by
opening your web browser from
any computer and entering:
www.linksys.com/registration
F
If you are unable to reach our
website, you may want to review
the installation and configuration
sections in this Quick Installation or
refer to the Troubleshooting
section of the User Guide.
8
IPoA
For additional information or troubleshooting
help, refer to the User Guide on the CD-ROM
or the Technical Support Insert. You can also
e-mail for further support.
Website
http://www.linksys.com/international
Registrations
http://www.linksys.com/registration
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2004
Cisco Systems, Inc. All rights reserved.
AG241-EU_LA_UK-QIG-41213NC JL