Symmons Unity S-6606 Manual De Operaciones Y Mantenimiento página 5

Installation
10) Place mounting plate (N) in po-
sition, mark and drill 3/16" holes
for tile anchors (N1), 5/16" holes
for drywall anchors (N2). Install
anchors.
N1
N2
N
Note: For drywall 1/2" thick or less,
insert anchor tool (N3) into drywall
anchor (N2) to secure behind wall
prior to installing wall cradle.
Operation (Temperature Control)
1) Turn shower handle counterclock-
wise approximately 1/4 turn to put
valve in cold position.
11) Remove cover of hand shower
cradle (O). Install cradle and
mounting plate (N). Secure with
three screws (P). Replace cover
on hand shower cradle.
N2
N3
2) Turn shower handle counterclock-
wise approximately 1/2 turn to put
valve in warm position.
O
N
P
5
12) Attach hand shower (M) to hose (T).
Attach hose (T) to vacuum breaker
(S). Connect vacuum breaker (S)
to wall ell (Q). Turn clockwise to
tighten.
M
T
13) Install tub spout (U) to pipe fitting.
Turn clockwise to secure.
U
3) Turn shower handle counterclock-
wise approximately 3/4 turn to put
valve in hot position.
Q
S
T