TMI VD74 Operación Manual

1
5
3
1. Pull out the crown to the
second click when the small
second hand is at the 12
o'clock position.
Rotate the crown to set the
day of the week
Turn the crown to set the hour
hand and minute hand to the
correct time (check that
AM/PM is set correctly)

Do not set the date between 10:00PM and 2:00AM, otherwise the date may not change properly. If it is necessary to set the date during that
time period, firstly change the time to any time outside it and set the date, and then reset the correct time.
OPERATION MANUAL
DISPLAY AND CROWN OPERATION
6
2
8 9
7
4
TIME SETTING
2. Push the crown back to the
normal position in accordance
with a time signal
VD74
1. Hour hand
2. Minute hand
3. Small second hand
4. Date indicator
5. Day indicator
6. 24 hour indicator
7. Crown at normal position
8. First click : Date setting (quick change function)
9. Second click : Time setting
3. Pull out the crown to the first
click. Turn the crown
counter-clockwise to set the
date.
English
4. Push the crown back to the
normal position.