Installation; Use; Maintenance / Cleaning; Environmentally Compatible Disposal - Vortice SCATOLA COMANDI Manual De Instrucciones

ENGLISH

Installation

The unit can be flush wall mounted, or surface wall mounted.
Flush mounting
- remove the circuit support from the box (fig.2)
- the circuit support is adaptable to different cover plates, using the two side adapters and the 4 removable
side tabs (fig.3,4)
- make the electrical connections;
- fix the holder to the back box, using the screws provided (fig.5);
- apply the pressure plate (purchased separately) to the holder (fig.6);
Surface mounting
- insert the duct with the wires (fig.7, 7a);
- fix the box to the wall (fig.8, 9, 10);
- make the electrical connections;
- fix the support to the box, using the screws provided (fig.11);
- fit the pressure plate (provided) to the support (fig.12);

Use

Available functions (fig.13)
- On-Off;
- 3 speeds.
- Motor 1/Motor 2.
Maintenance and cleaning
Fig.14,15,16
Important information on environmentally compatible disposal
In certain European Union countries this appliance is not subject to the requirements of national laws
implementing the WEEE Directive; consequently, there is no obligation to observe sorted collection procedures
when disposing of the appliance in these countries.
This appliance complies with European Directive 2002/96/EC.
Where an appliance is marked with the crossed-out wheelie bin symbol, this means that, at
the end of its useful life, the product has to be disposed of separately from household
waste: it must be taken to a sorted collection centre for electrical and electronic appliances
or returned to the retailer when a new equivalent appliance is purchased.
The user is responsible for taking the appliance to a designated collection centre at the end
of its useful life, and liable to penalties applicable under current statutory regulations on
waste disposal.
Appropriate sorted waste collection for subsequent recycling, treatment and eco-
compatible disposal of decommissioned appliances helps to prevent any possible negative impact on the
environment and on health, and favours recycling of the materials used in the manufacture of the product.
For more detailed information on available waste collection systems, contact the local waste disposal service
or the shop where the product was purchased.
Manufacturers and importers comply with their responsibility for recycling, treating and eco-compatible
disposal of waste both directly and collectively.
10