Koenic KTO 2210 B Manual De Instrucciones página 22

English
Clean crumb tray
Regularly remove the crumb tray from the
product and remove the crumbs.
Fig. Unplug the toaster and let it cool down.
12
Pull out the crumb tray and remove
the crumbs. Wipe the crumb tray with
a slightly damp cloth if there are heavy
stains. Re-insert the crumb tray.
Caution
Never use the toaster without the crumb tray.
Note
Be sure to properly re-insert the crumb tray
into the device.
The best toasting result
1. Depending on the moisture content of
the bread, the degree of roasting should
be adjusted. Choose a lower level for dry
bread.
2. Choose a higher level for whole grain
bread, fresh bread or bread with an
uneven surface.
x 2
22
IM_KTO 2210_180418_V04_HR.indb 22
Cleaning and care
Fig. Prior to cleaning, pull the power plug
13
out of the power outlet. Wait until the
device has completely cooled down.
Clean the exterior surfaces of the
housing with a slightly damp cloth.
Caution
Never immerse electrical parts of the device
in water or any other fluids during cleaning
or operation. Never hold the device under
running water. Never use solvents and
abrasives, hard brushes, metallic or sharp
objects for cleaning. Solvents are harmful to
health and attack the plastic parts. Abrasive
cleaners and tools do scratch the surface.
Storage
Fig. Wrap the power cord around the cord
14
stem as indicated on the underside
of the toaster. Store the toaster in a
dry, cool area which is protected from
humidity.
3. If only toasting one slice of toast, place it
centrally in the toaster and select a lower
degree of toasting.
4. Please note that the toast result will be
darker if the toasting is repeated several
times without cooling.
1
18/4/18 9:54 am