Bresser National Geographic AZ MOUNT Instrucciones De Uso página 27

E
Fig. 3a
Viewfinder / LED viewfinder
Depending on the telescope model you have, screw your viewfinder or LED viewfinder to the holder (Fig.
3a) or insert it directly (Fig. 3b). Then affix the viewfinder with screws. Check carefully which step is right
for your viewfinder.
Fig. 4
i
Fig. 5
Next, screw the vertical fine adjustment to the protruding silver metal supports on the telescope tube. It is
best if you let someone help you. Then you need to attach the telescope tube to the tripod. To do so, use
the spiral screw to screw the tube to the tripod head (Fig. 5). Attach the locking screw for the vertical fine
adjustment to the tripod head yoke (Fig. 6).


How to insert an eyepiece if you use a
reflecting telescope:
Take the lens cap off the eyepiece (6). You can now place the
eyepiece (15) into the eyepiece holder and secure it with the
small screw on the connector (Fig. 4).
Note: First, put the eyepiece with the largest focal width
(e.g. 20 mm) onto the zenith mirror. While you'll get the least
amount of magnification, it will be easier for you to view
things.
1@
d
Fig. 3b
1@
Fig. 6
d
1#
EN
27