Part 4. Functions And Operation; Housing Back - involight FOG900 Manual De Instrucciones

Part 4. Functions and operation:

4.1 Housing Back:

3.
2.
1.
1. POWER IN:
IEC current input socket with fuse holder for F6,3AL250V fuse.
The assignment of the connection leads is as follows:
Line
Brown Outer conductor
Blue Neutral conductor
Yellow/Green
The protective conductor must be connected!
IMPORTANT: Replace the fuse only with a fuse of the same type and with the same values (printed on the unit). If
the fuse is triggered repeatedly, please contact an authorized service center.
2. Hand release button:
3. Input cable remote control:
4. Status-LED:
se the status LED to quickly see if your fog machine is ready for fogging or heating up. Green =
Ready, Red = Heating
1.
5. Tank level indicator:
would destroy the pump. Such a case is not covered by the warranty!
4. 5.
Pin International
Protection
Used for manual triggering of the fog.
This input is used to connect the cable remote control (X-2).
Here you can see the filling status of the tank. Never let the machine run dry! This
L
N
14