Lens Adjustments - Axis 209FD Manual Del Usuario

AXIS 209FD/FD-R/FD-R M12/MFD/MFD-R/MFD-R M12 Installation Guide

Lens adjustments

Position
To adjust the position of the lens, follow these steps:
1. Open the Live View page in your
web browser.
2. While checking the image in the
Live View page, move the lens to
the desired position.
Focus
The focus of the AXIS 209FD/FD-R/FD-
R M12/MFD/MFD-R/MFD-R M12 is set
at the factory from 0.5m to infinity. It
does not normally need adjustment.
To focus on objects closer than 0.5m, or
if for some reason the lens has lost
focus, this can be adjusted in the
following way.
1. Loosen the lens lock screw.
2. Manually rotate the lens to adjust
the focus until the image on the
Live View page is satisfactory.
3. Gently retighten the lens lock screw.
Lens lock
screw
Page 11