Before Starting; Maintenance Instructions; Troubleshooting Table - SPERONI CAM 40 Manual De Instrucciones

3. Before Starting

Your irrigation pump is self-priming. Before starting for
the first time, the pump has to be filled through the delivery
union with the delivery liquid until it overflows.
Suction Piping
pipe higher than the pump (formation of air bubbles in
below the bottom water level.
Delivery Piping
situated in the delivery piping have to be fully open so

4. Maintenance Instructions

5. Troubleshooting Table

Trouble
Motor will not start
Pump will not suck
Insufficient rate of flow.
Thermal cutout switches off pump.
If it is not possibile to eliminate the trouble, please call our service department.
To avoid damage during transport, please ship in the ORIGINAL PACKING.
f
rinse out the pump thoroughly with water, empty it
by
it up for use.
CAUTION!
In order to work, the pump must always be filled
with the delivery liquid until it overflows!
Caution: The pump must never run dry. The
manufacturer's warranty is null and void in the event
of damage to the pump caused by its running dry.
Check that the pump is airtight, in fact not airtight
pipes draw in air preventing the pump from working
properly.
Cause
bodies.
15
Remedy
parts.