Operating Instructions - Skil PWRCORE 20 IF5940-00 Manual Del Propietário

Inflador de función dual de 20 v
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS

WARNING
fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach or bleach-containing products, etc, can cause a short
circuit.
WARNING
could result in serious personal injury.
WARNING
Any such alteration or modification is misuse and could result in a hazardous condition leading
to possible serious injury.
WARNING
or remove the 12V d.c. vehicle connector from the vehicle's 12V d.c. accessory socket.
when assembling parts, making adjustments, cleaning, or performing maintenance .
Choose Power Supply
Before switching your dual function inflator on, decide which power source you will be using: a
20V d.c. SKIL lithium battery pack or a vehicle's 12V d.c. power.
20V d .c . SKIL Lithium Battery Pack
This dual function inflator must be used only with the battery packs and chargers listed below:
2Ah
2Ah
SKIL
SKIL
BY519701
BY519702
NOTICE:
Please refer to the battery and charger manual for detailed operating information.
To attach the battery pack (Fig .2):
Align the raised rib on the battery pack with the
grooves of the dual function inflator, and then
slide the battery pack onto the dual function
inflator.
NOTICE:
Make sure that the latch on the
battery pack snaps into place and that the
battery pack is secured to the dual function
inflator before beginning operation.
To detach the battery pack (Fig .2):
Depress the battery-release button located
on the front of the battery pack to release the
battery pack. Pull the battery pack out and
remove it from the dual function inflator.
NOTICE:
When placing the battery pack in the
dual function inflator, be sure that the raised rib on battery pack aligns with the groove inside
the dual function inflator and that the latches snap into place properly. Improper attachment of
the battery pack can cause damage to internal components.
10
To reduce the risk of fire, personal injury, and product damage due to
a short circuit, never immerse your tool, battery pack or charger in
If any parts are damaged or missing, do not operate this product until
the parts are replaced . Use of this product with damaged or missing parts
Do not attempt to modify this dual function inflator or create
accessories not recommended for use with this dual function inflator.
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the dual function inflator
Battery Packs
2.5Ah
SKIL
BY519703
4Ah
SKIL
SKIL
BY519601
BY519603
Fig. 2
Chargers
5Ah
SKIL
SC535801
Battery-Release
Button
SKIL
QC536001
Detach
Attach

Publicidad

Tabla de contenido
loading

Tabla de contenido