Troubleshooting Table - Kohler K-1263840 Guía De Instalación Y Cuidado

Operation (cont.)
3.5 mm Stereo Input
A wired audio device can be connected to the auxiliary-in port on
the amplifier.
Audio input may be slightly delayed when a device is initially
connected.
Wireless Input
Once a BLUETOOTH device is paired, the LED will be solid blue
and the audio input will fade-in.
On the BLUETOOTH user device, the amplifier will display as
"VibrAcoustic."
If a BLUETOOTH pin number is required, use "0000."
NOTE: For more information on system operation, refer to the
Homeowners Guide.
Troubleshooting
IMPORTANT! Turn off the power supply before performing any
maintenance.
NOTE: For service parts information, visit your product page at
kohler.com/serviceparts.
This troubleshooting guide is for general aid only. For service and
installation issues or concerns, call 1-800-4KOHLER.

Troubleshooting Table

Symptoms Probable Cause
One or more A. Transducer wire is
1.
transducers do
not produce
sound.
1298482-2-C
Recommended Action
A. Make sure the wires
not connected are properly
properly. connected to the
amplifier. Each
transducer has a
white with black
wire which is the
positive (+) lead, and
a solid white wire
which is the negative
(-) lead.
10 Kohler Co.