Kohler K-1263840 Guía De Instalación Y Cuidado página 11

Troubleshooting (cont.)
Troubleshooting Table
Symptoms Probable Cause
B. Damaged
C. Transducer is
2. The music A. Thermal shut
stops even
though a song
is properly
selected, and
the status
indicator light
is blinking
yellow.
B. Amplifier error.
3. The status LED A. Power supply is
is not
illuminated.
B. Power supply
Kohler Co.
Recommended Action
B. The bath has six
transducer wires. transducers with
cables that are
permanently
attached. Inspect the
six transducers for
frayed, cut, or loose
wires. Contact the
Customer Care
Center for assistance.
C. If any one of the six
missing, loose, or transducers is
not attached. missing, loose, or not
attached to the bath,
contact the Customer
Care Center for
assistance.
A. Shut down the
down. system for 1 hour to
allow the unit to
cool. Make sure the
area where the unit
is installed does not
exceed 104°F (40°C).
Restart the system.
The LED status
indicator should be
solid blue.
B. Contact the
Customer Care
Center if the
amplifier LED status
indicator is blinking
yellow after the
system has been
restarted.
A. Plug the power
not plugged into supply into the
the outlet. outlet.
B. Check power supply
connection to the connection to the
amplifier is loose amplifier and
or disconnected. reconnect if needed.
11 1298482-2-C