Parts; Start Up - Truper TALI-12AC Manual De Instrucciones

Battery
Indicator
Battery
Charger
Charging the Battery
• Connect the charger plug into a 127 V~power outlet.
The charge indicator green light will be ON.
• Insert the battery into the charger as shown in the
image.
• The green light will be OFF and the red light shall turn
ON indicating charging is in progress.
• When the battery is charged in full, the green light will
be back ON and the red light will turn OFF.
• Disconnect the charger from the power outlet once
the charge finishes.
• If the red-light blinks, means the battery is defective.
Replace the battery with a new one.
• If the green light blinks, means the battery
temperature is lower than 32 °F or higher than 113 °F.
Wait until the battery temperature gets to the right
temperature range to charge.
6
ENGLISH
Keyless
Chuck
LED
Light
Charge
Process
Indicator
Battery
Connection
Socket

Parts

Torque Speed
Regulator Selector
Switch
Battery

Start Up

Direction of Rotation
and Blocking Button
Handle
Battery
Release
Button
1
2