Manuales relacionados para Truper DETA-N
Resumen de contenidos para Truper DETA-N
- Página 1 Manual Drywall 0.7 Hp screwdriver Power Applies for Code Model 16024 DETA-N DETA-N Read this manual thoroughly CAUTION before using the tool.
- Página 2 Manual before Parts using the tool. Preparation Keep this manual for future references. Start up The illustrations in this manual are for reference Maintenance only. They might be different from the real tool. Notes Authorized service centers Warranty policy DETA-N ENGLISH...
- Página 3 Technical data DETA-N Code 16024 Description Drywall screwdriver Bit holder hexagonal 1/4” Voltage 127 V Frequency 60 Hz Current 4.2 A Power 0.7 Hp Speed 0 RPM - 4 200 RPM Duty cycle 50 minutes work per 20 minutes idle. Maximum 6 hours per day.
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety standards for power screwdrivers General standards Before operating the screwdriver • Take your time to assess the job to be done. CAUTION • This tool is designed to operate with Double-check all the necessary caution measures are being screws. IT IS NOT A DRILL. observed before starting to work.
- Página 6 Parts Belt clip Depth stop Magnetic bit holder Depth control knob Rotation Phillips direction Continous insert bits button use button 0.9” Switch / speed control Handle Bit holder Cable protector Power NOTE. This is a reference image and not a normal operating mode. cable ENGLISH...
- Página 7 Preparation Assembly and disassembly of the tip. • Insert the tip into the tip holder until it stops. The magnetic tip holder allows the tip to be secured. • To change the screwdriver tip, turn the depth adjustment knob to the maximum and remove the tip. Pliers are sometimes required to remove the accessory.
- Página 8 Start Up Operation • Press firmly the screw bit against the material to be screwed until the depth stop sits against the material and the screwing insert is released. • To loosen screws, set the rotation direction selector button in the unscrewing position and turn the depth control knob to the maximum.
- Página 9 Notes ENGLISH...
- Página 10 Notes ENGLISH...
- Página 11 Authorizedservice centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800-018-7873 to get information about the nearest Service Center.
- Página 12 06060, where you can also purchase parts, components, consumables and accessories. The costs of transportation of the product that derive from its fulfillment of its service network are included. Truper will not require any proof of purchase to make the warranty effective. Phone number 800-018-7873. Made in China.