Kalorik USK MS 39759 Manual De Instrucciones página 5

Fax +32 2 359 95 50
Put the ingredients into a suitable container such as a mixing
•
bowl, cooking pan or the mixing cup included. Do not overfill to
avoid splashing when the motor is switched on.
Plug into a wall socket. The blue rings around the control buttons
•
will light up.
Important: put the shaft of the appliance vertically into the
•
ingredients to mix before pressing one of the switches. This will
avoid splashing when the motor is switched on.
Select a speed by turning the wheel at the top of the appliance.
•
Turning the wheel clockwise will increase the mixing speed, and
counter clockwise will reduce the mixing speed.
Note: we recommend starting with a lower speed setting and then
increase the blade rotation speed gradually if needed.
Switch on motor by pressing on the "On/Off" switch and blend by
•
pulsation. Remember to use for no longer than 1 minute
continuous use. The motor must then be left to cool down for 10
minutes.
Pressing on the "Turbo" button will enable you to engage, for a
•
short period, the maximum blade rotation speed, regardless of
the speed setting selected by the wheel on the top of the
appliance.
Tips:
Never fill the mixing cup to more than 2/3 full, to prevent over
•
flowing.
Always blend ingredients together with water or other liquid with
•
the stick blender.
Do not use the stick blender to blend dry, hard foods such as
•
coffee beans, ice cubes, sugar, cereals, chocolate etc.
Always use the appliance on a secure, dry level surface.
•
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity. Print only what is inside the frame.
5
Assembly page 5/24
MS 39759 - 120501