ION Pro Glow Duo 8 Guia De Inicio Rapido página 8

Operation
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Pro Glow 8.
3. Use the Mode button to select Bluetooth mode, which appears as "bt" in the display. Pro Glow 8
will automatically go into pairing mode to search for Bluetooth devices. You will know you are in
pairing mode when the Bluetooth icon is flashing.
4. Navigate to your Bluetooth device's setup screen, find PRO GLOW 8, and connect. The
Bluetooth icon will remain solidly lit.
Note: Users should consider updating their device's OS if experiencing trouble with pairing or
playing music.
5. To disconnect pairing, turn off Bluetooth on your device or select Forget this device from your
device.
Connecting Two Speakers
To link two Pro Glow Duo 8 speakers:
1. Plug a 1/4" cable into the Mix Output located on the rear panel of one Pro Glow Duo 8.
2. Plug the other end of the 1/4" cable into the 1/4" input of another Pro Glow Duo 8.
3. Power on both speakers. Use the Aux Input Volume on the second speaker to adjust the input
signal level.
8