Metrological Inspection - Chauvin Arnoux ORITEL DEN 100 Manual De Instrucciones

ORITEL ANC 100/15 (15 dB) horn antenna ........................................................................ P01.2753.04
ORITEL CGX 100/20 waveguide cross coupler ................................................................... P01.2753.05
ORITEL IRIS 20-30 (20 and 30 dB) coupling irises ............................................................. P01.2753.06
To use these components, refer to the corresponding operating manual.
Frequency: 8.5 to 9.6 GHz
SWR: < 1.25 of 8.5 to 9.6 GHz
Max. power: +19 dBm
Input connector: male «N»
Output connector: female «BNC»
Weight: 65 g
Dimensions: Ø 21 x 62 mm
Electromagnetic compatibility:
Compliance with NF EN 61326-1 standard, 1998 edition
For maintenance, use only specified spare parts. The manufacturer will not be held responsible
for any accident occuring following a repair done other than by its After Sales Service or approved
repairers.
5.1 Cleaning
Clean the thread of the connector's knurled clamping ring using cotton wool slightly moistened with ethyl
alcohol.
5.2

Metrological inspection

It is essential that all measuring instruments are regularly calibrated.
For checking and calibration of your instrument, please contact our accredited laboratories (list on request)
or the Chauvin Arnoux subsidiary or Agent in your country.
n Repairs under or out of guarantee
Please return the product to your distributor.
Our guarantee is applicable for twelve months after the date on which the equipment is made available
(extract from our General Conditions of Sale, available on request).
4. CHARACTERISTICS
5. MAINTENANCE
6. WARRANTY
8