Hamilton Beach 908 Serie Manual De Uso página 5

Operation
Operating the Blender–HBB908
wWARNING
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
Controls
The switch on the front panel allows you to control
the blender for precise blending requirements:
• The OFF (O)/Low (1)/High (2) switch will turn
the blender on for continuous operation at Low
or High speed or off.
• The High/Low settings allow you to select the
following speeds:
High – 19,000 RPM Low – 16,000 RPM
Using the blender
Before you use the blender for the first time, wash
the container, cover, and cutter assembly. Refer to
"Cleaning Instructions." Do not put the cutter
assembly in the dishwasher.
To operate the blender, proceed as follows:
1. Place the blender on a clean, dry, level surface.
Make sure that the OFF/LOW/HIGH switch on
the control panel is set to OFF (O).
2. Plug the blender into an electric outlet.
3. Place the ingredients to be blended into the
container.
4. Place the container onto the base.
Make sure it rests securely on the base.
5. Place the cover and filler cap on the container.
wWARNING
Cut Hazard
Always place cover on container when
blending.
Do not put hands, spoons, or other utensils
in container when blending.
Failure to follow these instructions can result
in broken bones, cuts, or other injuries.
OFF (O) / LOW (1) /
HIGH (2) Switch
6. Move the OFF/LOW/HIGH switch to the desired
speed. See "Professional Blending Techniques"
for blending tips.
7. When blending is complete, set the
OFF/LOW/HIGH switch to OFF (O).
Do not remove the container from the base
until the unit has stopped completely.
5