20
OPERATING YOUR WASHER
OPERATING YOUR WASHER
1. Ready mode
1) Coin / Card type
– The cycle LEDs are lit at the same
time, when the prices of cycles are
equal.
2) OPL type
– The cycle LEDs flash at the same time,
and displays PUSH.
NOTE
• Price setting varies by country
• Set your country from
(Refer How to enter the
• After EEPT, reset your country (Default
country is USA)
2. Insert card/coin (not for OPL type)
Insert a cash card that has a sufficient balance.
The card balance should be more than the
programmed vend price for a selected cycle.
NOTE
• When the card balance is not enough,
machine displays the card balance for 5
seconds and then displays
sage repetitively
• Insert a sufficient amount of change that
is more than the programmed vend price
for the selected cycle.
NOTE
• The machine will not start until sufficient
coins are inserted.
3. Select the cycle
• Select cycles designed for different types of
Hot
mode
Warm
)
Cold
Delicates
4. Add super wash
mes-
5. Custom PGM
6. Change course
7. Cycle finish
❋ Do not work any button and stop the washer
Press the desired button and press the
Start button. The display LED will show the
remaining time and the selected cycle starts.
fabric and soil levels.
CYCLE
Fabric type
Cotton, linen, towels,
shirts, sheets
Cotton, mixed loads,
work clothes, jeans,
shirts
Cotton, dress shirts,
pants, wrinkle-free
clothing, cotton/
poly blend clothing,
tablecloths
Dress shirts, blouses,
nylons, sheer or lacey
garments
Wash time or rinse cycle can be added
when additional coin is inserted or a valid
cash card is entered.
Customized cycle program can be used.
Only available in OPL type.
You cannot change the cycle while the
machine is running.
The machine stops and LED display shows
with beeper sound.
(When the washer is operating) or (when a
cycle is in progress)
WARNING
• To reduce the risk of fire, electric shock, or
injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating
this appliance.
Wash/Rinse
Temp.
Hot / Cold
Warm / Cold
Cold / Cold
Cold / Cold