Maintaining your appliance
A
A.
Oven door hinge lock in
locked position
B.
Oven door hinge lock in
unlocked position
54 English
NV51K7770S_AA_DG68-00857A-01_EN+MES+CFR.indb 54
3.
Open the oven door.
Locate the oven door hinge locks in
4.
B
both corners of the oven door, and then
rotate the hinge locks toward the oven
door to the unlocked position. If the
door hinge lock is not rotated fully (see
illustration B on the left for an example
of full rotation), you will not be able to
remove the door properly.
Partially close the door to engage the
5.
door latch locks. The door will stop at
this point.
6.
Using two hands, grasp the edges of
the oven door. Lift and pull the oven
door toward you and remove. You may
need to gently shift the door from side
to side as you pull.
7.
Set the oven door aside on the
prepared covered work surface with the
oven door resting on its handle.
Replacing the oven doors
CAUTION
The door is very heavy. You may need help lifting the door high enough to slide it
into the hinge slots. Do not lift the door by the handle.
1.
2.
A
A.
Slot in the oven cavity for the
door hinge lock
3.
Using two hands, grasp the side edges
of the door at the midpoint. Face the
oven cavity.
Locate the slots on each side of the
oven cavity for the door hinge locks.
Hold the door at a 45° angle, and then
align the door hinges with the slots
in the lower front of the oven cavity.
Slowly insert the door, making sure you
maintain the 45° angle. You will know
the door is engaged in the slot when
you feel a slight drop.
8/24/2016 12:30:46 PM