Klarstein LAUSANNE Manual Del Usuario página 21

EN
A distance of 600 mm from bottom of heater to floor is recommended for optimum
viewing of fuel bed. See Fig.1 for recommend fixing dimensions. For optimum viewing,
mark the top five screws fixing positions on wall in accordance with the recommend
fixing dimensions (see Fig.2). Drill holes with a No. six drill bit.
Fix the wall bracket using that the plug and screws provided. Attach the lower fixing
bracket the base of the fire using the two small black screws supplied; ensure the bracket
is fitted so that it is level with the back. Carefully lift the heater up ensuring that the top
rear ledge of heater engages with the wall bracket (see Fig.2 in circle) and is sitting
centrally. This process should be carried out by two people to avoid injury or damage.
Mark the lower fixing bracket two fixing hole positions on the wall-see Fig.3, remove the
heater. Drill the wall and insert the wall plugs. Refit the heater to the wall and fasten the
bottom fixing bracket to the wall using the screws provided to permanently fix the heater
in place. Unpack the pebbles from the bag and place them along the light unit in the
desired position.
21