Operating Environment; Intended Usage - e-ast SL Serie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33

Operating Environment

Place the inverter on a firm, level and temperature-resistant surface and avoid placing any heavy and/or combustible items on top of the inverter.
Ensure that:
• Sufficient ventilation is provided at all times. Place the inverter in a position in which no ventilation slot is obstructed there is at least 10 cm
clearance on all sides;
• No direct heat sources (e.g. heating) have an influence on the inverter;
• Direct sunlight and/or bright artificial light does not reach the inverter;
• Avoid contact with spray, dripping water and aggressive liquids do not operate the inverter in close proximity to water. In particular, the inverter
must never be submerged. Do not place objects filled with liquids on or next to the inverter;
• The inverter should not be placed in the immediate vicinity of magnetic fields (e.g. loudspeakers);
• No open fire sources (e.g. burning candles) should be placed on or next to the device;
• Avoid intrusion from foreign matter (such as dust and other small particles);
• The inverter is not exposed to strong temperature fluctuations, otherwise condensation of air humidity can lead to a short-circuit;
• The surrounding temperature should be maintained at between 0 - 40 ° C;
• The air humidity during storage <55% and in operation <85%;
• Avoid exposing the inverter to excessive shocks and vibrations;
Cable
Fasten the cable always by the plug and do not pull the cord. Do not handle the cord with wet hands, as this may cause a short circuit or an electric
shock. Do not place heavy objects on the inverter or the cable. Ensure that the cables are not bent, especially on the plug and on the connections
eyelets/clamps. Never make knots in the cable and do not tie it together with other cables. All cables should be positioned so that nobody can step
on or is disabled by the cables. Protect the cable from sharp-edged or pointed parts. If necessary, use conduits. A damaged cord can cause a fire or
electric shock.
Check the power cord from time to time for damage and other changes. See also instructions under "Accessories".
Maintenance and Care
An expert examination is required if the inverter or any accessories have been damaged. Only authorized personnel should be allowed to carry out
the inspection. Cleaning the device should only be carried out with a dry, clean cloth never with aggressive liquids/solutions. Do not attempt to open
the inverter housing. Doing so would invalidate the warranty.
Children
Electrical devices do not belong in children's hands! Never let children operate electrical devices unsupervised. Children cannot always recognize
possible dangers. Small parts can be life threatening, if swallowed. Keep the packing foil away from children's reach as there is a risk of suffocation.

Intended Usage

Depending on the type of the inverter, it is meant to be connected to either a 12V or a 24 V DC power source. This enables the inverter to supply
230V AC voltage for the operation of electrical device (only). The inverter is designed for private use, not suitable for commercial or industrial use.
The inverter is by default not intended for medical, life saving or life sustaining purposes.
The inverter is not supposed to be used in tropical climates. Only those cables and external devices should be used which comply with the device's
safety, electromagnetic and shielding specifications. This device complies with all the relevant CE requirements and standards. Compliance is not
guaranteed, if any change to the inverter is carried out which is not approved by the manufacturer.
Important Information Regarding Usage
Please pay close attention to the information regarding continuous output power and peak power. Devices with a higher connection value than
the specified continuous power must not be operated on this inverter. The higher peak power can only cover short surge currents - for about 0.3
seconds.
Pay attention to the audio alarm and the control lights. When the alarm sounds and the red warning light is illuminated, the capacity of the
power source could be almost exhausted and the inverter is being supplied with a low voltage level. In such a case, turn off the connected
equipment and disconnect from the power source. Use the inverter again only when the power source is recharged and able to supply the
inverter with sufficient voltage.
Use only the cables delivered with the items. Inverters with two terminal pairs (units from 1500 W) should be connected with the accompanying
two pairs of cables, since at maximum power the input current flow is extremely high. This requires the cross-section of both pair of wires.
Otherwise, a risk of fire exists!
4

Publicidad

Tabla de contenido
loading

Tabla de contenido