Craftsman CMXEOCG781 Manual Del Propietário página 38

LCD DOOR CONTROL (CONTINUED)
SCREEN AND MENU NAVIGATION
The main screen displays the time, temperature, and current battery charge (if
applicable).
The features on the door control can be programmed through a series of menus on
the screen and the navigation buttons. Refer to the descriptions below.
FEATURES
Press the navigation button below "MENU" to view the Features menu.
Clock Setup: Set the time, choose 12 or 24 hour clock and show/ hide clock.
TTC settings (for sectional doors only): Set the Timer-to-Close feature off/on and
set the time interval before door closes. NOTE: DO NOT enable TTC if operating a
one-piece door. TTC is to be used ONLY with sectional doors.
Lock: Enable/disable lock.
Program: Add remote controls, an extra remote button to control your garage door
opener lights, or a keyless entry.
Push Bar
Navigation
Buttons
LIGHT Button
SETTINGS
Press the navigation button below the down arrow till you see TEMPERATURE to
view the Settings menu.
Temperature: Display the temperature in Fahrenheit or Celsius and show/hide the
temperature.
Language: Select a language (English, French, or Spanish).
Light Settings: Set duration for garage door opener light to stay on after operation,
selectable range of 1-1/2 to 4-1/2 minutes. Turn the Motion sensor off/on, and turn
the entry light feature off/on.
Contrast: Adjust the contrast of the screen.
To program a remote control or keyless entry to the garage door opener using the
door control see page 39.
38
Screen
Motion Sensor