Connecting The Drain Line - LG LSWF3885HVS El Manual Del Propietario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CONNECTING THE DRAIN LINE

• The drain hose should always be properly
secured. Failure to properly secure the drain
hose can result in flooding and property
damage.
• Do not install the end of the drain hose higher
than 96 inches (244.8 cm) above the bottom of
the washer.
• The drain must be installed in accordance with
any applicable local codes and regulations.
• Make sure that the water lines are not stretched,
pinched, crushed, or kinked.
NOTE: If the drain hose is extended more than
4 inches beyond the end of the elbow bracket,
mold, or microorganisms could spread to
the inside of the washer.
Option 1: Standpipe
Clip the end of the hose into the elbow bracket.
Insert the end of the drain hose into a standpipe.
Use tie strap to secure the drain hose in place.
NOTE: Total height of the hose end should not
exceed 96 inches (244.8 cm) from the bottom of
the washer.
I N S TA L L AT I O N I N S T R U C T I O N S
Option 2: Laundry Tub
Clip the end of the hose into the elbow bracket.
Hang the end of the drain hose over the side of
the laundry tub. Use tie strap to secure the drain
hose in place.
NOTE: Total height of the hose end should not
exceed 96 inches (244.8 cm) from the bottom of
the washer.
Option 3: Floor Drain
Elbow
Bracket
Tie Strap
Stand
Pipe
Floor Drain
Drain
Hose
Insert the end of the drain hose into the floor
drain. Secure the hose in place to prevent it
from moving.
Elbow
Bracket
Tie
Strap
Drain
Hose
Drain Hose
Laundry
Tub
13

Publicidad

Tabla de contenido
loading

Tabla de contenido