Existing Construction Assembly Instructions - Home NetWerks 7130-03-BT Manual De Instrucciones

ASSEMBLY INSTRUCTIONS
5. Secure the suspension bracket I (C) to fan
housing using short machine screw (BB)
(included).
6. Remove fan junction box cover. Using quick
connect ports connect house wires to fan
wires as shown in wiring diagram on page 5.
Replace fan junction box cover.
7. Connect a 4 in. circular duct and vent to the
outside. Secure it with duct tape or clamp.
Turn on power source. Test the fan.
EXISTING CONSTRUCTION – ACCESSIBLE
FROM ABOVE
BEFORE INSTALLATION
Turn off power source. Review all safety
precautions.
1. Remove existing fan.
www.homewerksww.com
5
6
7
1
7
Duct
Wiring
Quick
box
connector
House
wires
Product
wires