Step 4 Attach Weight Plate To Base; Step 5 Insert Gas Line Through Platform / Attach Shroud Cover - Endless Summer 235000 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Step 4 – Attach Weight Plate to Base
Lay Base Assembly on its side.
Line up slots at outside edge of Weight Plate with hooks on Wheel
Bracket.
Place Weight Plate in Base, feet out.
Insert Carriage Bolt through center holes of Base and Plate.
Using 9/16" wrench, secure Plate to Base using a (1) Large Lock Washer
and (1) Large Nut.
Place Base Assembly upright.
Step 5 – Insert Gas Line through Platform/Attach Shroud Cover
Insert Gas Line up through large hole in Platform from underneath
between center and left leg as shown in illustration.
Slide Shroud Cover over Gas Line, then over Platform/Leg assembly
until bottom of Shroud rests on Base.
Owner's manual: model 235000 outdoor patio heater
6/11/04
®
8

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido