D-Link DAP-1522 Guia De Instalacion página 4

When using the DAP-5 you need to decide whether to use it as a standard AP or a Bridge
(Extender / Client). You can do this by changing the switch position on the back of the product.
Depending on how you wish to use you DAP-5, this section will help you decide which setting
works best with your setup.
AP mode
If you already have a wired or wireless router, and
want to add the extra 5GHz n or .GHz n
Router
wireless to your network, you will need to move the
switch on the back panel of the DAP-5 to "AP"
DAP-5
Wired PC
Bridge (Extender / Client) mode
NETWORK DVR
If you want to wirelessly connect
multiple Ethernet enabled devices
such as a game consoles, media
players, or network attached storage
GAME CONSOLE
devices you will need to move the
Router
DAP-5
switch on the back panel to "Bridge"
NETWORK TV VIEWER
DIGITAL MEDIA PLAYER
Auto mode
If the switch on the back panel of the DAP-5 is se to "Auto", the device will look for 0 seconds
for an IP address for your router. If an IP address is found, it will automatically shift to AP mode. If an
IP address is not located, the DAP-5 will automatically default to Bridge mode.
Note. Because Auto mode will configure DAP-5 as a bridge mode automatically when setting up
the device for the first time. D-Link users Click'n Connect with CD please do not select Auto mode
– please use AP mode or Bridge.
Technical Support
D-Link UK Technical Support over the Telephone:
0871 873 3000 (United Kingdom)
BT 10ppm (UK Pence per minute), other carriers may vary.
Times Mon-Fri 9.00am - 6.00pm Sat 10.00am - 2.00pm
+1890 886 899 (Ireland)
€0.05ppm peak, €0.045ppm off peak Times Mon-Fri 9.00am - 6.00pm Sat 10.00am - 2.00pm
D-Link UK & Ireland Technical Support over the Internet:
http://www.dlink.co.uk
UK: 08456 12 0003
ftp://ftp.dlink.co.uk