Reer FoodBall Instrucciones De Uso página 9

Remove the bottle from the baby food warmer and, as the warming
operation is over, turn the rotary switch for the temperature setting
back to the OFF position. Remove the device's plug from its power
source and pour the water out of the baby food warmer.
Caution: Hot! Please let it cool down for some time.
Caution: Before you give the bottle to the child, always check the temperature of its con-
tents first. Shake or touch the bottle to let the heat distribute evenly. The baby food must not
be hotter than 37 °C (i.e. body temperature). Check the temperature by putting a couple of
drops on the inside of your wrist. The milk should feel warm, but not hot.
2. Warming premade food in a feeding bottle
Before warming, remove the label from the food bottle, so that it does
not detach during warming and stick to the water container of the
baby food warmer. Unscrew the lid of the food bottle before putting it
in the device.
Place the bottle in the device and fill the water container with warm
water until it reaches approximately 1 cm from the edge of the con-
tainer.
Alternatively, you can use the food container for warming the baby food.
Put 90 ml of water in the baby food warmer. To do this, you can
use the food cup with an integrated measuring cup.
Then put the baby food in the food container (max. 190 g) and
place it without the storage lid in the baby food warmer.
Caution: Do not use more than 90 ml of water for warming;
otherwise, the water will spill over when using the container.
16
Move the rotary switch on the front side to the
ating light is on.
We recommend stirring the food occasionally to let the heat distribute
evenly.
The warming time can be extended or shortened depending on the contents and the amount
thereof, on the type of food container used as well as on the initial water temperature and
the ambient temperature. The warming time
for baby food is about 6–8 minutes, depending on the factors mentioned above, as well as
on the initial temperature of the baby food.
Remove the glass or food container from the baby food warmer and, as the warming opera-
tion is over, turn the rotary switch for temperature setting back to the OFF position.
Remove the device's plug from its power source and pour the water out of the baby food
warmer.
Caution: Hot! Please let it cool down for some time.
Caution: Before you give the baby food to your child, always check the temperature of its
contents first. The baby food must not be hotter than 37 °C (i.e. body temperature). Thus,
always check the temperature.
3.Function for maintaining heat
You can also keep already-heated baby food warm: to do this, simply
leave the bottle in the device after warming and set the rotary switch
in the position for keeping the food warm (see Figure).
Caution: For microbiological reasons (germ formation), you should
keep baby food warm for no more than 1 hour.
mark. The oper-
17