Kenmore 587.1402 Serie Guía De Uso Y Cuidada página 10

Operating Instructions
Hi-Temp Wash
When HI-TEMP WASH option is selected,
the dishwasher heats water in the main
wash to approximately 140
This increase in water temperature helps
dishwasher detergent remove food grease
and soil from dishes more eff ectively and
aids in drying. HI-TEMP WASH option
can be used with all cycles except RINSE
ONLY. HI-TEMP WASH is automatically
provided when the HEAVY WASH cycle is
selected.
When HI-TEMP WASH option is selected,
the light above the pad will come on and
remain on until end of cycle. To turn off
the HI-TEMP WASH option, press the pad
a second time.
Delay Start
The DELAY START option allows you
to automatically delay starting your
dishwasher from 2-4 or 2-4-6 hours
depending on your model.
On models with 2-4-6 hour delay, press the
pad once for a 2 hour delay, twice for 4
hours and three times for 6 hours. A light
will come on indicating the delay start
hours and will remain on until cycle starts.
To cancel the Delay Start option and begin
the cycle before the delay period is over,
press the START/CANCEL pad.
Heated Dry Option
The HEAT DRY option in combination with
rinse aid will give you excellent drying
results. The energy to use HEAT DRY costs
pennies per cycle. You may turn off the
HEAT DRY option, however you will have
items in your dish load that will not be dry
at the end of the cycle.
With either option, you may see water
vapor coming from vent during the drying
portion of the cycle. Some models have a
vent that is closed during washing to hold
moisture and sound inside and then opens
for drying.
To turn off the HEAT DRY option, press the
pad a second time. The light above the
pad will turn off .
Child Lock Controls
To prevent children from accidently
changing the dishwasher cycle or starting
the dishwasher, lock the dishwasher
F (60 C).
0 0
controls by pressing and releasing the
HEAT DRY pad for 3 seconds while the
door is latched. An indicator light on the
lock graphic pad will illuminate when the
controls are locked and no new selections
can be made until the lock is released. To
unlock the controls, press the HEAT DRY
pad until the indicator light goes out.
To Cancel a Cycle
You can cancel a cycle anytime during the
cycle. Press START/CANCEL pad and the
dishwasher will start a 90 second drain.
At the end of the drain, select the desired
cycle.
10