Technical Specification - Beamz MHL108 Wash MK3 18x 3W RGB Manual De Instrucciones

Ocultar thumbs Ver también para MHL108 Wash MK3 18x 3W RGB:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FIXTURE CLEANING
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light
output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty
surrounding can cause greater accumulation of dirt on the unit's optics.
Make sure the area below the installation place is free from unwanted persons during servicing
Housings, fixations and installations spots( ceiling, truss, suspensions) should be totally free from any
deformation
The mains cables must be in impeccable condition and should be replaced immediately when even a small
problem is detected
In order to protect the fixture from overheat the cooling fans (if any) and ventilation openings should be cleaned
monthly.
The interior of the fixture should be cleaned annually using a vacuum cleaner or air-jet.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
ATTENTION: We strongly recommend internal cleaning to be carried out by qualified

TECHNICAL SPECIFICATION

Rated voltage
: AC110~240V 50/60Hz
Rated power
: 60W
LED
: 18x3Watt (3-1 RGB)
Control Signal
: DMX signal
Dimmer
: 0-100% mechanic dimmer
Pan movement
: 540°
Tilt movement
: 180°
Channel
: 6 or 11 Channels
Function
: DMX, Sound active and Master-Slave.
Dimensions per unit
: 175 x 175 x 245mm
Weight (per unit)
: 2.9kg
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be
changed without prior notice.
worker!
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

150.999

Tabla de contenido