Dimensions; Eyewash Installation - Bradley S19-672 Manual Del Usuario

Installation

Dimensions

8½"
(216mm)

Eyewash installation

1
Remove the plastic dust plug from the bottom of
the yoke assembly and discard.
Hose spray for S19-672 model only. Do not attach
body wash spray head at this time.
Attach the pressure gauge to
C
the adapter on the pressure
side of the tank with pipe
sealant (by installer) .
NOTICE: When attaching the pressure
gauge and hose spray to the tank
outlet, hold the adapter (item 3) with a
wrench to prevent stripping. Failure to
do so may damage the seal and cause
leakage. Max. torque 150 in-lbs.
Bradley • 215-321B Rev. W; ECN 14-05-015
35⁵⁄₈"
(905mm)
25"
(635mm)
Body Wash Spray Head
B
Connect the hose with pipe sealant .
(by installer)
6"
(152mm)
27½"
(699mm)
A
Attach the eyewash yoke assembly
to the tank . Max . torque 150 In-Lbs .
7/29/2014
S19-672, S19-671
3