Leveling Instructions; Humidity Control - Danby DFF101B1BSSDB Manual Del Propietário

OPERATING INSTRUCTIONS
REFRIGERATOR TEMPERATURE SELECTION
The refrigerator control panel is located on the inner
ceiling of the refrigerator compartment.
Press the arrow button to set the temperature of
the appliance The single snowfl ake is the warmest
setting and the three snowfl akes indicate the coldest
setting. The indicator light will illuminate to show
which level is currently selected.
Press and hold the arrow button for 3 seconds to
turn off the compressor.
While the compressor is off, the power light will
illuminate and the cooling function will not operate.
This allows the door of the refrigerator to be left
open while cleaning or adding large amounts of
food without using energy.
To resume the cooling function, press the arrow
button once and the refrigerator will return to
normal functioning.
Internal temperature of the appliance can vary
based on ambient temperature, the quantity of items
stored and how frequently the door is opened.
FREEZER TEMPERATURE SELECTION
The freezer control is located on the back wall of
the freezer compartment. The single snowfl ake is the
warmest setting and the three snowfl akes indicate
the coldest setting. Turn the dial to set the freezer to
the desired temperature.

LEVELING INSTRUCTIONS

There is an adjustable leg on the bottom of the
appliance that can be turned up or down to ensure
that the appliance is level.
1. Turn the leveling leg counter-clockwise as far as
it will go, until the top of the foot is touching the
bottom of the cabinet.
2. Slowly turn the leveling leg clockwise until the
appliance is level.

HUMIDITY CONTROL

There is a humidity control gauge on the crisper
that can be used to control the level of humidity
inside the crisper. The single water drop indicates
less humid conditions. The three tear drops indicate
more humid conditions.
4