Model - Ingersoll Rand W040 Serie Especificaciones Del Producto

EN

Model

W040
W040SQ
W040P
W150
W150P
W150QC
W175
W175P
W360
W360P
W360-2
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Lubrication
Remove hammer case to apply lubrication. Grease the anvil, impact mechanism assembly and
gears every 8 hours with Ingersoll Rand #100 grease. Apply grease evenly and sparingly. An
excessive accumulation of grease will result in sluggish operation.
Parts and Maintenance
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
Environmental Protection
When life of Ingersoll Rand electrical product has expired, it must be recycled in accordance
with all applicable standards and regulations (local, state, country, federal, etc.). Improper
disposal may endanger environment.
For European Union countries only:
Ingersoll Rand electrical products that have reached end of life must be recycled in accordance
with Waste Electric and Electronic Equipment Directive (2002/96/EC).
Ingersoll Rand electrical products should be returned directly to:
Ingersoll Rand Distribution Centre
Hindley Green
Wigan
Lancashire WN2 4EZ
England
Telephone: +44 (0) 1942 257131
Fax: +44 (0) 1942 526255
EN-2
Sound level dB (A)
(EN60745)
† Pressure (L )
p
83.8
83.8
83.8
90.8
90.8
90.8
90.8
90.8
92.3
92.3
92.3
Vibration Level
‡ Power (L )
w
94.8
94.8
94.8
101.8
101.8
101.8
101.8
101.8
103.3
103.3
103.3
(EN60745)
m/s
2
2.1
2.1
2.1
5.6
5.6
5.6
5.6
5.6
11.2
11.2
8.5
80226780_ed4