Battery Status - Beamz professional BBP66 Uplight Par Manual De Instrucciones

BATTERY STATUS

When the power lead is not connected and you don't touch the menu buttons, then the display shows the battery status
automatically after a while.
Display
FIXTURE CLEANING
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output.
Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding
can cause greater accumulation of dirt on the unit's optics.
•
Make sure the area below the installation place is free from unwanted persons during servicing.
•
Housings, fixations and installations spots( ceiling, truss, suspensions) should be totally free from any deformation.
•
The mains cables must be in impeccable condition and should be replaced immediately when even a small problem is
detected.
•
In order to protect the fixture from overheat the cooling fans (if any) and ventilation openings should be cleaned
monthly.
•
The interior of the fixture should be cleaned annually using a vacuum cleaner or air-jet.
•
Clean with soft cloth using normal glass cleaning fluid.
•
Always dry the parts carefully.
•
Clean the external optics at least every month. Clean the internal optics at least every 30/60 days.
ATTENTION: We strongly recommend internal cleaning to be carried out by qualified worker!
6
Status
Battery is charge for 100%
Battery is charge for 75%
Battery is charge for 50%
Battery is charge for 25%. Light output is automatically reduced to 60%.
When display is blinking, the light output is automatically reduced to 10%. Please plug in the
power lead and connect with outlet immediately. If not, the product will turn off after 10
minutes.