Switching On And Off - Hotline 47HLC40-Gemini Guía De Instalación Y Garantía

9
10
9

Switching on and off

To turn the Gemini,
on and off, when
operating from
battery power,
unclip/clip the red
croc clip from the
battery terminal.
Do not disconnect
power by removing
the power input jack
from the side of the
energiser.
11
Pulse/low battery indicator
The light on the front of the Gemini will
flash green with every pulse. As your battery
loses power, it will start to flash red indicating
that you need to charge the battery.
Important: Running the energiser while
the LED is flashing red may damage the
life of the battery.
Connection to the fence
12v connection
Connect the lead with the red croc
clip to the fence (from red terminal)
& the green croc clip (from the green
terminal) to the ground rod. We
recommend a minimum of one ground
road driven approx. one metre into the
ground. Connect the croc clips on the
battery lead to a 12v leisure/marine
battery.
230v (adaptor) connection
The energiser should be mounted
indoors or in
environment and connected via the
provided adaptor to a wall socket. Using
insulated HT lead-out or undergate
cable, take a line from the red terminal
to the fence one from the green
terminal to the ground rod. The ground
rod should be 10m from the building to
ensure there is no interference with the
buildings mains safety earth.
a weatherproof