Equalizer Settings - ECG BTS Elysium L1 Manual De Instrucciones

Altavoz inalámbrico portátil
Tabla de contenido

Publicidad

After 3 seconds, the LED indicator of the left speaker begins to flash. Next, enable Bluetooth on your mobile
phone or other player and initiate the search for Bluetooth devices. "BTS Elysium L1" appears, connect the
speakers. Once connected, the left speaker indicates "Device paired" and the LED indicator turns blue. You can
then begin playing music on the Bluetooth speakers in stereo mode.
Both paired speakers can be disconnected from your mobile phone/player by short pressing 7. The speaker
will indicate "TWS disconnected".
Long press 7 on any of the speakers to disable TWS. The speaker will indicate "TWS Cleared".
Note:
1.
Two adapters are required for powering the speakers, one adapter for each.
2.
Before pairing the speakers to use TWS, neither of the speakers shall be paired with any other device. LED
indicators on both devices should flash blue.
3.
If either of the two speakers is paired with another BTS Elysium L1 speaker, you must first unpair this
connection, otherwise you will not be able to pair the speaker. Long press 7 on each speaker to delete
the existing TWS connection.

5. Equalizer settings

The default setting is normal mode. Short press 6 to switch to bass mode or treble mode.
6. Playing music from micro SD card
After inserting your Micro SD card into the speaker, short press 2 to switch the speaker into memory card
playback mode and play music directly from the Micro SD card. The speaker will indicate "Memory card mode"
before playing.
Warning: The speaker supports Micro SD cards with a maximum capacity of 32 GB and supports MP3, WMA,
WAV, APE and FLAC audio formats.
short press: PLAY / PAUSE
short press: previous track
n
long press: decrease volume
n
M
long press: previous Micro SD directory
short press: next track
N
long press: increase volume
N
M
double press: next Micro SD directory
7. AUX IN mode
Connect the speaker to an audio source (PC, MP3MP4, mobile phone) via 3.5mm audio cable. Short press 2 to
enter "AUX IN" mode (speaker indicates "AUX IN"). Music begins to play from the audio source.
Notes:
If you are connecting the speaker to a  computer with a  3.5 mm audio cable, we recommend using
a genuine adapter (5 V / 2 A) to charge the speaker instead of the computer USB port. Powering the device
from the computer may be insufficient.
Short press 1 to lower the music volume. The source of music continues to play the music at a lower
volume.
8. FM tuner
Short press 2 to initiate FM mode (the speaker indicates "Mode FM"). While in FM mode, long press 2 to
initiate the auto-tuning of FM stations. Short press 4 / 5 to tune to previous/next station.
GB
41

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido