Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
WARNINGS
When using this electric unit, basic safety precautions should always be followed to reduce the risk of
fire, electric shock and personal injury, including the following:
1)
Read all instructions before using this unit.
2)
Use only for intended household use as described in this manual.
3)
Plug the fan directly into a 110 V A/C electrical outlet.
4)
Never insert your fingers, pencils, or other objects through the fan grill during operation.
5)
The fan should be used on a stable and level surface. Do not operate without the grill being
properly in place.
6)
Do not expose the fan to excessive heat or humidity. This could cause damage to the electrical
components.
7)
Do not immerse in any type of liquid. Do not use near water.
8)
The fan should be kept out of the reach of children. Close supervision is necessary when the fan
is used by or near children.
9)
Do not operate this or any appliance with a damaged cord, if the unit malfunctions, or if it has
been dropped or damaged in any manner. Connect to properly polarized outlets only.
10) Do not cover the cord or place near heat sources. Keep the cord away from high traffic areas, and
do not submerge in water.
11) Unplug the fan before moving, cleaning or making repairs. NOTE: If for any reason this unit
requires service, return appliance to manufacturer or a similarly qualified service agent to ensure
safety.
12) To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control
device.
13) To disconnect, grip plug and pull from wall outlet. Never pull on the cord to unplug.
14) For indoor use only.
P-2
All manuals and user guides at all-guides.com
PRODUCT DIAGRAM
1. Front guard
2. Locking nut
3. Fan blade
4. Fan motor
5. Left cover
6. Rear guard
7. Control box
7-1. Control box cover
7-2. Switch
7-3. Capacitor
7-4. Control buttons
8. Right cover
9. Supply cord
10. Base
11. Right baseboard
12. Left baseboard
OPERATING INSTRUCTIONS
1)
2)
3)
4)
CLEANING
- Always switch the fan off and unplug it before cleaning.
- Using the damp cloths and mild detergent to clean the parts, and ensure that all detergent residues
- Never use abrasive cleaning agents or solvents.
- Do not immerse in any form of liquid.
Set the fan on a stable, level surface.
Confirm that the Speed Control Lever is set to "0" (off). Plug the cord into a standard outlet.
The fan has 3 speed settings
:
(See the picture)
0- Fan is off
1- Lowest speed
2- Medium speed
3- Top speed
Unplug the fan when not in use.
are removed.
P-3
Publicidad
Tabla de contenido
