unGer HYDRO POWER ULTRA DIUH1 Instrucciones De Manejo página 13

HydroPower® Ultra
Tips for cleaning with pure water
Other sources of errors
Damage to laminated and coated glass:
Test on a small area first and allow to dry. Check the results before cleaning the entire
glass surface. Water beading on the surface may indicate hydrophobic glass – change
to Fan Jets for better results.
High air pollution:
Dirt particles present in the air, especially in heavy traffic or high pollen count areas,
may affect cleaning results – you may need to dry the window with a squeegee.
Dirty Brush:
Clean the brush to avoid transferring any impurities back onto the window.
Post construction cleaning:
This may require removal of plaster, stucco, concrete, paint, texture, taping mud,
mortar, silicone, stickers and tape from glass. Generally, traditional glass cleaning
methods are recommended for this type of cleaning.
Scratching of Plexi & Acrylic:
Surface dirt retained through static charge can produce scratches in the soft material.
Apply plenty of pure water and use a soft brush such as a boar bristle brush. Contact
the client to advise of the risk of scratching.
Lack of experience:
Ask for advice! Your Approved UNGER Dealer, UNGER Customer Service Team or your
UNGER Sales Representative will be happy to help you.
www.ungerglobal.com 13