Kenmore 580.73069 Manual Del Propietário página 7

D
INSTALL THE AIR CONDITIONER IN
THE WINDOW
• Carefully lift the air conditioner and slide it into the
open window. Be careful not to hurt waist in this
operation.
• Use the two hand grips on top sides of unit to lift unit.
• Make sure that support bracket is inserted in the
pocket under base fan, and that curtain frame
guide is stopped by stopper on the support bracket
as shown in FIG.8.
NOTE: When unit is properly centered and pushed
outward to correct bracket location, you will feel unit
drop securely in place on the support bracket. Hold
unit firmly during this procedure.
• Lower top window sash all the way down so that
sash sits firmly in top channel of unit and
expandable curtain frames.
During the following step, hold unit firmly until
window sash is lowered to top channel behind
curtain frames. Personal injury or property
damage may result if unit falls from window.
CENTERLiNE
FIG. 7
WINDOW SASH
HAND GRIP
TOP CHANNEL _.
'_ :::_ OUTDOOR
INDOOR
SECTION SECTION
SUPPORT
_ BRACKET
--_ .....
!_
,
POCKET
CURTAIN
........................................................
_ STOPPER
_ _.
SUPPORT
INNER
SILL
_-'J BRACKET
_ ' _--__... LEVELING BOLT
......
h _ OUTERSILL
INDOOR I I OUTDOOR
FIG. 8
D SECURE THE CURTAIN FRAMES
Expand the curtain frames and secure them using 5
screws (ITEM E) as shown in FIG. 9.
When curtain frame opens or closes, you may feel a
slight resistance. This is normal.
D
FOAM SEAL AND WINDOW LOCK
• Cut the foam seal (ITEM F) to the window width.
Stuff the foam seal between the glass and the
window to prevent air and insects from getting into
the room, as shown in FIG.9.
• install the L bracket to prevent window from being
raised which may result in unit falling.
FIG. 9
ITEM E
L-Bracket and curtain frame screws must be
installed as instructed to avoid the possibility of
unit falling from window and causing personal
injury or property damage.
NOTE: If window sash has a metal surface, use
sheet metal screws instead of the provided wood
screws. Obtain sheet metal screws at local
hardware store.
-7-