Replacement Parts; Accessories - Techne Tecal 425S Manual Del Usuario

T E C A L 4 2 5 S O P E R A T O R ' S M A N U A L
Fuses
If neither the power light nor display (on the front panel) is lit, one of the two
fuses may have blown. Make sure there is no external cause (such as a
faulty plug or lead).
Fuses should only be changed by suitably qualified personnel. If the fuses
blow persistently, a serious fault is indicated and you should return the
calibrator to your supplier for repair.
Never fit a fuse rated higher than the value indicated on the unit, serious
damage or personal injury may result.

Replacement parts

Each unit is supplied with an extraction tool, a soft carrying case and a
mains cable. The following parts may be purchased if replacements or
alternatives are required.

Accessories

PAGE 16
6101058 Insert extractor
FCAB10UK Mains cable, 230V UK units
FCABLEEU Mains cable, 230V units
FCABLEUS Mains cable, 120/100V units
6103711 Soft carrying case
Part Nº Description
FDB00CP Cooling Probe
FCAL232 CALSOFT PC software kit