Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Symbols on the Product
On the products you will fi nd symbols that indicate warnings or provide information:
•
Warning: The nozzles become hot during operation.
•
If the hair dryer is used in the bathroom, remove the mains plug after use as water
represents a hazard. This also applies when the hair dryer is switched off.
•
Do not put objects, hair or your hands in front of the air intake opening! The device can
suffer damage despite the overheating protection if the airfl ow is blocked!
•
Please ensure that the inlet grille remains free of fl uff and hairs. Danger of fi re!
•
As additional protection we recommend the installation of a fault current protection
device (RCD) with a rated current of not more than 30 mA in the wiring system of the
bathroom. Please contact an authorised electrician for advice.
1. Fully unwind the mains cable.
2. Make sure that the iron voltage (see name plate) and the mains voltage match.
3. Insert the plug into a duly installed 230V/50Hz protective contact socket.
4. Shift the switch on the handle to one of the desired heat/blowing levels:
GB
Switch-off
•
After use shift the switch to position „0" and pull out the plug. Leave the device to cool
before putting it away!
•
To this purpose you can place the device on one of the rubberised sides of the housing
•
Store the device in the see-through bag.
•
Before cleaning remove the mains lead from the socket.
•
Clean the housing with a soft, dry cloth without additives.
•
The device must never be immersed in water!
32
Neu.indd 325-HT 897CB Neu.indd 32
Special safety instructions for this device
Warning of electric shock!
Do not use this device near baths, wash basins or other
vessels containing water.
Commissioning
Level 0:
off
Level 1:
medium airfl ow and medium temperature
Level 2:
strong airfl ow and high temperature
Cleaning and care
01.12.2008 12:04:57 Uhr
0 1 . 1 2 . 2 0 0 8 1 2 : 0 4 : 5 7 U h r
Publicidad
Tabla de contenido
