C O N N E C T I O N S - Gemini CDJ-700 Manual De Instrucciones

c o n n e c t i o n s

-
c o n n e c t i n g t h e c d j 7 0 0
p o w e r
Plug in the power cord of the CDJ-700 into the AC IN
(A).
l i n e o u t p u t
Plug one end of the included RCA cable into the LINE
OUTPUT JACK (B) on the rear panel. Plug the other end
of the RCA connectors into any available line input jacks
on your mixer. If you are connecting the CDJ-700 through
a receiver, you can plug the RCA connectors into the CD
AUX INPUT JACKS on your receiver. If there are no CD or
AUX INPUTS use any line level (not phono) inputs.
u s b o u t
Plug iin the USB cable into the USB OUT (C) on the rear
panel. Plug the other end of the USB cable into any avail-
able USB port on your computer. This will enable you to
use the CDJ-700 in MIDI mode.
d i g i ta l o u t
Plug a S/PDIF cable (not included) into the DIGITAL OUT
on the CDJ-700 (D) and into any DIGITAL IN port on any
device. This will send the digital audio to that input. Pos-
sible applications include using the DIGITAL OUT to
record or to feed to a DAW (Digital Audio Workstation)
8
- .
c d j 7 0 0 m a n u a l • g e m i n i d j c o m